• Roll width up to 1650 mm (maximum working width 1600 mm).
• Unwind station for rolls up to ø700 (larger diameters on request).
• Crush cut with mechanical knife holder system type KK for single knife holders as well as with fixed knife sets.
• Variable speed drive approx. 50 m/min.
• Built-in cross cutter.
• Main drive approx. 2.2 kW.
• Cutting pressure is pneumatically adjustable.
  Brake and web tension are manually adjustable.
• Rewind station for rolls up to ø400 mm.
• For very fine up to extremely coarse materials.

• Unwind station for rolls up to ø700 mm (larger unwind stations on request).
• Unwinding with various systems possible:
  – with square shaft 32/32 mm
  – with pneumatically expandable unwind shaft for cores with ø75 mm.
• Manually adjustable unwind brake.

Options:

• Unwind station for larger roll diameters on request.
• Pneumatically expandable unwind shaft for cores with ø75 mm.

• Mechanical knife holder type KK-25-F as well as fixed knife sets.
• Knives are activated by a pneumatic system (knife holder shaft moves pneumatically).
• Built-in scale for easy adjustment of cutting width.
• Wave cut as well as straight cut possible.
• Built-in cross cutter.
• Further information can be found on the separate page for knives, knife holders and fixed knife sets.

• Rewind station for rolls up to ø400 mm (max.).
• Rewinding with two mechanically expandable rewind shafts for cores with ø75 mm and slots for winding without sleeve.
• Web tension individually adjustable on both shafts.
• Reversible rewind drive for winding with grain outside or inside.

Options:

• Two pneumatically expandable rewind shafts for cores with ø75 mm. Shafts with pipe connection and slots for winding without sleeve.

• Unwind stations for larger roll diameters.
• Length counter (only indicating).
• Pneumatically expandable unwind shaft for cores with ø75 mm.
• Two pneumatically expandable rewind shafts for cores with ø75 mm. Shafts with pipe connection and slots for winding without sleeve.