• Roll width of 1650 mm and 2000 mm.
• Unwind station for rolls up to ø750 mm (optionally up to ø1250 mm).
• Pneumatic knife system type PK (alternatively mechanical knife system type KK).
• Variable speed drive up to approx. 60 m/min.
• Built-in cross cutter.
• 2 drives:
  – Main drive for cutting cylinder 7.5 kW.
  – Additional drive for rewinding 4 kW.
• Magnetic powder clutches for web tension adjustment.
• Rewind station for rolls of maximum ø600 mm.

Unwind station of roll slitter type RSEB

• Unwind station for rolls up to ø750 mm (optionally for rolls up to ø1250 mm).
• Unwinding with various systems possible:
  – with square shaft 40/40 mm (others on request)
  – with pneumatically expandable unwind shaft for cores with ø75.
• Pneumatically adjustable unwind brake.

Options:

• Unwind station for rolls up to ø1250 mm.
• Pneumatically expandable unwind shaft ø73 mm.
• Automatic and contactless brake control type AV.
• Automatic edge guiding system (with servo drive – no hydraulic system).

• Pneumatic knife holder type PK-30-P for efficient changeover thanks to its pneumatic clamping system (3 or 4 stage cylinder with 160 kp respectively 210 kp).
• Cutting pressure is adjustable by a regulator (individual pressure regulation on request).
• Each knife can be switched on or off on its own.
• Built-in cross cutter.
• Cutting cylinder axially movable by hand (for optimal use).
• Further information can be found on the separate page for knives, knife holders and fixed knife sets.

Options:

• Mechanical knife system type KK instead of pneumatic knife holder type PK-30-P.

• Maximum rewinding up to ø600 mm.
• Rewinding with two swiveling, pneumatically expandable rewinding shafts for cores with ø75 mm and slots for winding without sleeve.
• Reversible rewind drive for winding with grain outside or inside.

• Unwind station with automatic edge guiding system (with servo drive – no hydraulic system).
• Unwind station for rolls up to ø1250 mm.
• Automatic length measuring device to stop the machine after the pre-selected length is reached.
• Automatic and contactless brake control type AV.
• Safety devices like light curtain on unwind as well as rewind side and safety fences on both sides of the machine (necessary for CE conformity).