Knives for straight cut

Knives for crush cut system (straight cut)

• Knife type 100/40/2
  Outside diameter 100 mm, center 40 mm, knife thickness 2 mm.
  For use with: Knife holder type KK-15-F, KK-25-F, KK-25-P.
• Knife type 100/40/1
  Outside diameter 100 mm, center 40 mm, knife thickness 1 mm.
  For use with: Knife holder type KK-15-F, KK-25-F, KK-25-P.
• Knife type 130/40/2
  Outside diameter 130 mm, center 40 mm, knife thickness 2 mm.
  For use with: Knife holder type PK-30-P, KK-30-P, knife set, WSQ, HQ, HQP.
• Knife type 130/40/1
  Outside diameter 130 mm, center 40 mm, knife thickness 1 mm.
  For use with: Knife holder type PK-30-P, KK-30-P, knife set, WSQ, HQ, HQP.
• Knife type 128/45/8
  Outside diameter 128 mm, center 45 mm, knife thickness 8 mm in the center.
  For use with: Knife holder type KK-50-P.
• Knife type 80/26/8
  Outside diameter 80 mm, center 26 mm, knife thickness 8 mm in the center.
  For use with: 242/19, 252/19, 262/19, 272/19.

Knife for wave cut

Knives for crush cut system (wave cut)

• Knife type 90/50/3
  Outside diameter 90 mm, center 50 mm, knife height 3 mm, wave distance 12 mm, knife thickness 0.75 mm.
  For use with: Knife holder type KK-25-F, KK-25-P.
• Knife type 20800
  Outside diameter 130 mm, center 50 mm, wave height 8 mm, wave distance 20 mm, knife thickness 1 mm (0.75 mm on request).
  For use with: WSQ, HQ, HQP, ARGW.
• Knife type 14400
  Outside diameter 130 mm, center 50 mm, wave height 4 mm, wave distance 14 mm, knife thickness 1 mm.
  For use with: WSQ, HQ, HQP, ARGW.

Knife for shear cut system

Knife for shear cut system (straight cut)

• Type ST-008
  For use with: Cut-to-length machine type HT, HTB, HTBP, HTP, ST.

Blades for guillotine cut

• Straight cut
  For use with: Cut-to-length machine type SGW.
• Wave cut
  For use with: Cut-to-length machine type SGW.
  

  Blade for straight cut

  

  Blades for wave cut

Mechanical knife holder type KK-15-F

Knife holders for crush cut system

• Knife holder type KK-15-F
  – Mechanical.
  – Minimum cutting width 15 mm.
  – For all common materials.
  – Knife type 100/40/2, 100/40/1 for straight cuts.
  – Mechanical clamping system on the knife holder shaft.
  – For use with:
  BTK-247, BTK-248, BTB-262, BTB-272, BTV-295, RSZ, RSZB, RSE, RKK, RKZ, …

• Knife holder type KK-25-F
  

  Mechanical knife holder type KK-25-F

  – Mechanical.
  – Minimum cutting width 25 mm.
  – For all common materials.
  – Knife type 100/40/2, 100/40/1 for straight cuts.
  – Knife type 90/50/3 for wave cut.
  – Mechanical clamping system on the knife holder shaft.
  – For use with:
  BTK-247, BTK-248, BTB-262, BTB-272, BTV-295, RSZ, RSZB, RSE, RKK, RKZ, …

• Knife holder type PK-30-P
  – Pneumatic.
  

  Pneumatic knife holder type PK-30-P

  – Minimum cutting width 30 mm.
  – For all common materials.
  – Knife type 130/40/2, 130/40/1 for straight cuts.
  – Pneumatic clamping system on the knife holder shaft.
  – For use with: RSEB, …

• Knife holder type KK-30-P
  – Pneumatic.
  – Minimum cutting width 30 mm.
  – For coarse materials (Polyester/Fiber).
  – Knife type 130/40/2, 130/40/1 for straight cuts.
  – Mechanical clamping system on the knife holder shaft.
  – For use with: RSE, RKK, RSR, …

• Knife holder type KK-50-P
  

  Pneumatic knife holder type KK-30-P and KK-50-P

  – Pneumatic.
  – Minimum cutting width 50 mm.
  – For very coarse materials (Polyester/Fiber).
  – Knife type 128/45/8 for straight cuts.
  – Mechanical clamping system on the knife holder shaft.
  – For use with: RSE, RSR, …

• 

  Knife sets with 1 pair of knife set holder

  Fixed knife sets
  – Maximum knife set width 310 mm (for belt width <15/25 mm). - For all common materials. - Knife type 130/40/2, 130/40/1 for straight cuts. - Quick-change system for each knife set. - Only 1 pair of knife set holder for various knife sets needed. - For use with: BTK-247, BTK-248, BTB-262, BTB-272, RKK, RKZ, ...