• Maximum cutting length 720 mm (with straight cut).
• Usable as a combination machine (direct connection to every skiving machine type 494) or as stand-alone system.
• Automatic transfer of the material to the skiving machine with grain side down (for tape joints).
• Unwind station for rolls up to ø750 mm and a roll width of up to 610 mm.
• Automatic feeding and measuring system (minimum feeding length of 200 mm).
• Length and number of cuts can be entered digitally.
• Cutting angle adjustable from 45° to 90°.

• Unwind station for rolls up to ø750 mm and a width of up to 610 mm.
• Pneumatically expandable unwind shaft for cores with ø75 mm.
• Can be loaded from the side – no hoisting system needed.

Options:

• Automatic brake control type AV.

• Automatic feeding and measuring system (the material will be fed, not drawn).
• Minimum feeding length of 200 mm (the material should be as flat as possible).
• Measurement accuracy of approx. 1 mm or 0.1 % of cut length.
• Length and number of cuts can be entered digitally.

• For joint direction type AL.
• Cutting angle adjustable from 90° to 45°.
• Guillotine cutting machine type SGW
  – for straight cut (standard) or wave cut (optional).
• Maximum cutting length of 720 mm (with straight cut).
• After the cut, the material will be transferred with grain side down to the skiving machine (for tape joints).
• Further information can be found on the separate flyer for knives, knife holders and fixed knife sets.

Options:

• Blade holder and blades for wave cut (for cutting machine type SGW).

Joint directions type AL and AR (seen from the grain side). Recommended: type AL

• Blade holder and blades for wave cut (for cut-to-length machine type SGW).
• Automatic brake control type AV.