The crush cut cutting machine type WSQ is an easy machine for cutting to length sheets/blanks when producing flexible and coated abrasive belts.

The cut-to-length machine works with a crush cut system, which allows making straight cuts as well as wave cuts.

• Home
• Technical data
• Cutting
• Options
• Layout / Arrangement
• Pictures

• Cutting length 450 mm, 1050 mm, 1650 mm, 1850 mm, 2200 mm.
• Crush cut system for straight cut or wave cut with wave form type 20800.
• Cutting angle adjustable between 90° and 45°.
• Cutting pressure pneumatically adjustable.
• Crush cut against replaceable steel strip.
• Pneumatic clamp to hold the material during cutting.
• Material is passing through with grain side up.
• Machine can be turned on its pedestal.
  Depending on the machine type, the pedestal can be arranged in the middle or on the outside.
• Freely adjustable traveling distance of the cutting carriage when working with machines larger than 1050 mm.
• Can be combined with semi-automatic or automated plants.

• Crush cut system for straight cut or wave cut with wave form type 20800.
• Cutting angle adjustable between 90° and 45°.
• Cutting pressure pneumatically adjustable.
• Crush cut against replaceable steel strip.
• Foot operated cutting (knife is moved by an electric motor).
• Further information can be found on the separate flyer for knives, knife holders and fixed knife sets.

• Counter to stop the machine after the pre-selected number of cuts is reached.
• Guide bar with stop (2 m long) and scale for measuring the length of the material to be cut.
• Extension to guide bar (pieces of 2 m).

L with operation side on the left. R with operation side on the right. Left/right refers to the direction on which the belt is pulled off.

Knife for wave cut (wave form type 20800)

Knife for straight cut