The shear cut cutting machine type STB is a simple machine for cutting to length sheets/blanks when producing flexible and coated abrasive belts.

The cut-to-length machine works with a dished knife, which pushes against a "throw-away" blade. Due to its shear cut system, a very precise cut will be achieved (only straight cut possible).

• Home
• Technical data
• Cutting
• Options
• Layout / Arrangement
• Pictures

• Cutting length 1050 mm, 1650 mm, 1850 mm, 2200 mm.
• Knife is moved by an electric motor.
• Shear cut system for straight cut.
• Cutting angle adjustable between 90° and 45°.
• Pneumatic clamp to hold the material during cutting.
• Material is passing through with grain side up.
• Machine can be turned on its pedestal.
  Depending on the machine type, the pedestal can be arranged in the middle or on the outside.
• Can be combined with different unwind stations as well as integrated in automated plants.

• Shear cut system for straight cut.
• Cutting with a dished knife against a „throw-away“ blade.
• Knife is moved by an electric motor.
• Further information can be found on the separate flyer for knives, knife holders and fixed knife sets.

• Counter (only indicating).
• Counter to stop the machine after the pre-selected number of cuts is reached.
• Guide bar with stop (2 m long) and scale for measuring the length of the material to be cut.
• Extension to guide bar (pieces of 2 m).

L with operation side on the left. R with operation side on the right. Left/right refers to the direction on which the belt is pulled off.

Insight into the shear cut cutting machine type STB