• Maximum joint length 500 mm or 1600 mm.
• Machine for max. 2 or max. 4 scuffing aggregates.
• Mechanical or pneumatic clamping device (depending on machine type).
• No compressed air needed for the operation with the mechanical clamping device.
• Table model without pedestal (pedestal available on request).
• Table is moved by hand.
• Standard working direction from right to left.
• The aggregates can be easily integrated in the working process.
• Built-in connection pipes for aspiration.

Aggregate type D/DU

• For skiving the grain with a diamond cup wheel.
  The aggregate is working from the top (type D) or from the bottom (type DU). The diamond cup wheel is often used for overlap joints or when producing belts with a top skive. The aggregates can be adjusted precisely in all directions to ensure an optimal processing of each material.

Aggregate type C

• For grinding and scuffing with an abrasive belt parallel to the joint.
  The aggregate type C is working from the top and it can be adjusted precisely in all directions to ensure an optimal processing of each material.

Aggregate type P/PU

• For pointing or scuffing with an abrasive belt, a wire brush or other tools.
  The aggregates are working from the top (type P) or from the bottom (type PU). Both are typically used before gluing the belt ends. The aggregate works at an angle to the joint. The angle should correspond to the joint angle of the belt and can be adjusted. The aggregates can be adjusted precisely in all directions to ensure an optimal processing of each material.

General information

• All aggregates can be easily adjusted in height, forward/sideward inclination and angle.
• More than one aggregate of the same type is often used when working with large machines or double lap preparation machines. This possibly allows a preparation of both lap ends in the same working process or an easy conversion when changing the joint type.
• The aggregates can be easily integrated in the working process by pushing them forward or backward and this guarantees an efficient working. When using more than one aggregate of the same type, they can be set for repeating applications and do not need to be readjusted every time, which is an advantage when producing overlap and tape joints with the same machine.

• Aggregate type D
  Working from the top against a hard metal plate, and diamond cup wheel included.
• Aggregate type C
  Working from the top against a hard metal plate, with an abrasive belt on a parallel basis.
• Aggregate type P
  Working from the top against a hard metal plate, with an abrasive belt on a parallel basis.
• Addition to aggregate type P for interchangeable tools,
  to make the aggregate work with a wire brush or other tools.
• Machine frame with two feet.
• Pneumatic clamping device (for type SKZ-500).