• Press force adjustable up to approx. 5000 N.
• Maximum press length 450 mm or 1800 mm.
• Active press width 20 mm, 30 mm or 40 mm.
• For overlap joints and/or tape joints.
• Built-in heating up to 80 °C.
• For one wide belt or optionally for several narrow belts.
• Working direction from left to right (standard).

• The rear lap has to be inserted first. It is then positioned automatically from behind onto the joint and held in position by pneumatic belt clamps.
• The front lap must be joined manually onto the rear lap. The belt is automatically transferred from the joining station to the press by a conveyor belt. From there, the pressed belt will be ejected automatically.
• Joining of a new belt during the pressing cycle is possible.

• Automatic positioning of the rear lap onto the joint.
• In general for inserting one belt (optionally with 3 sections for 2 or 3 narrow belts).
• The rear lap can be easily inserted in the positioning device. The device brings then the lap end into the joining station where the front lap can be joined manually.
• Pneumatic belt clamps are holding the rear lap in position during the process.
• After joining, a pre-pressing with a maximum of 4000 N can be made.
• Heating in the joining station up to 60 °C.

Options:

• Positioning device for 2 or 3 narrow belts.

• Automatic transfer to the press by a conveyor belt.

Options:

• Two conveyor belts for the transport from the joining station to the press for an even more secured transport of pre-pressed belts (especially recommended for pre-coated tapes).

• Active press width 20 mm, 30 mm or 40 mm.
• Press force adjustable up to approx. 5000 N.
• 1 or 2 pressing cycles.
• Two-speed drive approx. 0.2 m/sec and 0.4 m/sec.
• Built-in heating up to 80 °C.
• Fixed safety cover behind the press.
• Movable safety cover on the front side for direct view into the machine.
• The belt will be ejected after pressing.

• Positioning device for 2 or 3 narrow belts.
• Two conveyor belts for the transport from the joining station to the press
  for an even more secured transport of pre-pressed belts (especially recommended for pre-coated tapes).
• Stronger pre-pressing for more adhesive effect (pre-coated tapes).